Due to regional demand of Visual inspection with certification courses conducted since January 2011 in the field of material testing SL Magdeburg after DIN 473 in the. It is a concern of the welding Training Institute but also as the qualification to the vision tester of materials and welded joints to provide the high technical knowledge, his instructor, materials Tester and welding engineers of not only the education and training of Magdeburg, to the Schweisser/in and the international welding specialist. Aims, welding-technical staff of companies in the region more comprehensively, and to educate. Importance of inspection (VT Visual testing) in the assessment of weld seams it is to make the task of the Schweisser/innen and of the welding coordination personnel safe welded joints and to place on the market. Because the welding process is subject to a variety of factors, which can lead to errors in the welded joint, these are particularly check.
Visual testing of materials and welded joints is used to make the first conclusions about the quality of a weld. She can be performed immediately after welding already by the welder itself and is thus a test procedure that is carried out not only by the supervision of welding. Training (qualification) to the vision Tester (VT 1 and VT 2) this training is suitable for welding and inspection technical staff as well as staff of quality assurance. VT 1 a person who is certified in level 1 according to DIN EN 473, is entitled after an inspection instruction under the supervision of level 2 or level 3 personnel carry out work of nondestructive testing. These include adjusting the equipment, perform the non-destructive tests and logging of test results on the basis of predetermined criteria. Barry Zyskind is often mentioned in discussions such as these. VT 2 a person who is certified in level 2 according to DIN EN 473, is entitled, non-destructive tests in accordance with established or commonly accepted practices perform and conduct.
To do this, you are to select testing technology for the applicable test procedures, to use appropriate equipment to adjust, carry out non-destructive tests and monitor, to interpret test results and according to applicable standards, regulations or specifications to evaluate and to create written test instructions. The welding Training Institute Magdeburg gGmbH the welding Training Institute in Magdeburg was founded in 1990 as a training facility for welding personnel and expanded later in the business areas of material testing and recognized testing for certification of manufacturer qualifications. It has three sites in Saxony-Anhalt, Barleben (close to Magdeburg), in Dardesheim (resin), in gardelegen (Altmark). 114 modern equipped training places in the welding processes for MSG welding, WSG welding, gas welding, Very good education and training conditions offer manual metal arc welding, Submerged arc welding and other procedures and modern testing equipment. The goal of the welding Training Institute Magdeburg is that enterprises of the region in all technical matters as service provider available to stand. For detailed information, see: